| |
If
you want to buy AMSOIL Products, visit the AMSOIL
On-Line Store
AMSOIL
New Jersey Dealer |
|
|
|
|
|
Synthetic XL-7500 Motor Oils
AMSOIL XL-7500 Synthetic Motor Oils are specially
formulated to provide outstanding wear protection, power,
fuel economy and performance for 7,500 miles or six months
of service. With AMSOIL XL-7500 Synthetic Motor Oils, motorists
driving 15,000 miles a year need only change their oil twice
annually. AMSOIL XL-7500 Synthetic Motor Oils offer a high
degree of convenience and savings through their ability to
perform and protect engines for extended periods. |
|
Product Codes
|
|
XLF
|
5W-30 |
|
XLT
|
10W-30 |
|
XLM
|
5W-20 |
|
XLO
|
10W-40 |
|
|
|
| |
PRODUCT DESCRIPTION
AMSOIL XL-7500 Synthetic Motor Oils are specially
formulated to provide outstanding wear protection, power, fuel economy
and performance for 7,500 miles or six months of service. With AMSOIL
XL-7500 Synthetic Motor Oils, motorists driving 15,000 miles a year
need only change their oil twice annually. AMSOIL XL-7500 Synthetic
Motor Oils offer a high degree of convenience and savings through
their ability to perform and protect engines for extended periods.
Thermal and Oxidative Stability
AMSOIL XL-7500 Synthetic Motor Oils eliminate the need for frequent
oil changes. Outstanding thermal and oxidative stability ensures
long- term physical and chemical integrity of the oils after exposure
to engine operating temperatures.
Low Volatility
Low volatility makes AMSOIL XL-7500 Synthetic Motor Oils highly
resistant to oil consumption. The oils continue to lubricate, maintain
fuel economy, and reduce exhaust emissions for an extended drain
interval.
Shear Stability
Superior shear stability ensures AMSOI L XL- 7500 Synthetic Motor
Oils maintain protective viscosity throughout extended service life.
The oils continue to protect engine components from metal-to-metal
contact and wear, especially in high temperatures.
High Temperature Performance
AMSOIL XL-7500 Synthetic Motor Oils offer outstanding high-temperature
engine protection and performance. Engines operate in optimal temperature
range in high-stress conditions. In high-temperature operations,
AMSOIL XL-7500 Synthetic Motor Oils provide clean, dependable lubrication
and protection.
Low Temperature Performance
Wax-free synthetic stocks ensure the rapid flow of motor oil throughout
the engine after startup, protecting engines from wear. AMSOIL XL-7500
Synthetic Motor Oils' low temperature fluidity also helps engines
start dependably year-round and significantly improves cold temperature
fuel economy.
Fuel Economy and Power
AMSOIL XL-7500 Synthetic Motor Oils enhance fuel economy and powerful
performance. Low coefficients of friction ensure the maximum delivery
of engine power with minimal frictional losses.
Corrosion, Rust and Foam Control
AMSOIL XL-7500 Synthetic Motor Oils seal out rust, neutralize acids
and resist foaming. Rust inhibition is an especially important feature
for engines subject to frequent short-trip operations or for stored
engines. Acid neutralization protects engines from damage caused
by corrosive by-products of combustion. Foam resistance ensures
protection against metal-to-metal contact and wear.
Additive Durability
AMSOIL XL-7500 Synthetic Motor Oils contain top-quality additives
designed for long-term performance. AMSOIL XL-7500 Synthetic Motor
Oils protect engines from wear, corrosion, deposit accumulation
and sludge buildup. The long-life additives in AMSOIL Synthetic
XL-7500 Synthetic Motor Oils are designed to keep engines clean
and protected for 7,500 miles or six months, whichever comes first.
|
Meets
or exceeds the following specifications for domestic
and foreign gasoline engines:
|
|
5W-20
|
5W-30
|
10W-30
|
10W-40
|
- API SL, SJ
- ILSAC GF-3, GF-2
- Ford WSS M2C153H
- ACEA A1, B1
- JASO VTW
|
- API SL, SJ
- ILSAC GF-3, GF-2
- Ford WSS-M2C205A, M2C153G
- GM 4718M
- Chrysler MS 10440, MS 6395H
- ACEA A1, B1
- JASO VTW
|
- API SL, SJ
- ILSAC GF-3, GF-2
- Ford WSS-M2C205A, M2C153G
- GM 4718M
- Chrysler MS 10441, MS 6395H
- ACEA A1, B1
- JASO VTW
|
- API SL
- SAE J300
- ILSAC GF-3, GF-2
- Ford WSS-M2C205A, M2C153G
- GM 4718-M
- Chrysler MS 10440, MS 6395H
- ACEA A1, B1
- JASO TW
|
MIXING AMSOIL
AMSOIL XL-7500 Synthetic Motor Oils are compatible
with conventional petroleum oils. However, AMSOIL does not recommend
using a mixture of XL-7500 oils and conventional oils for 7,500-mile
or six-month drain intervals. Engine oil additives are not recommended
for use with AMSOIL XL-7500 oils.
SERVICE LIFE
In gasoline-fueled passenger vehicles in normal or
severe service, change AMSOIL XL-7500 Synthetic Motor Oils at 7,500-mile
or six-month intervals, whichever comes first.
Change aftermarket or OEM full flow oil filters
with every oil change.
Premium quality AMSOIL Full-Flow Oil Filters are
recommended for use with AMSOIL XL-7500 Synthetic Motor Oils, and
may be used for 7,500 miles or six months, whichever comes first.
TYPICAL
TECHNICAL PROPERTIES (Revised 4/03)
AMSOIL XL-7500 SYNTHETIC MOTOR OILS
|
| |
5W-20
(XLM)
|
5W-30
(XLF)
|
10W-30
(XLT)
|
10W-40
(XLO)
|
|
Kinematic Viscosity @ 100°C,
cSt (ASTM D-445)
|
8.9 |
10.3
|
10.2 |
14.5 |
|
Kinematic Viscosity @ 40°C, cSt
(ASTM D-445)
|
45.0 |
50.9 |
59.0 |
80.9 |
|
Viscosity Index (ASTM D-2270)
|
183 |
196 |
163 |
178 |
|
CCS Viscosity, cP @ (°C) (ASTM
D2602)
|
3670 (-30) |
2320 (-25) |
2300 (-20) |
4951 |
|
Flash Point °C (°F) (ASTM D 92)
|
229 (444) |
234 (453) |
229 (444) |
232 (450) |
|
Fire Point °C (°F) (ASTM D 92)
|
242 (468) |
250 (482) |
242 (468) |
248 (478) |
| Pour Point °C (°F) (ASTM D 97) |
-46 (-51) |
-51 (-60) |
-43 (-45) |
-42 (-44) |
|
Noack Volatility, % weight loss
(g/100g) (DIN 51581)
|
8.2 |
8.8 |
4.7 |
5.6 |
|
High Temperature/High Shear
Viscosity @ 150°C and 1.0 X 106 s-1,
cP (ASTM D4683)
|
2.9 |
3.1 |
3.2 |
3.8 |
|
Four Ball Wear Test (ASTM D 4172
@ 40 kgf, 150°C, 1800 rpm, 1 hour, Scar in mm)
|
0.38 |
0.38 |
0.38 |
0.38 |
| Total Base Number (ASTM D2896) |
10.2 |
10.1 |
10.2 |
10.2 |
|
|
|
Unbeatable Lubrication
and Protection in High-Performance Gasoline Engines
Engines in race cars, high-performance
street cars, ATVs and motorhomes face high temperatures, vigorous
engine speeds or heavy loads, each a potent stressor. AMSOIL Series
2000 20W-50 Synthetic Racing Oil offers unmatched protection for engines
facing tough operating conditions.
Unbeatable Wear Protection
AMSOIL Series 2000 20W-50 Synthetic Racing
Oil is specially formulated to carry the oil's wear reducing and heat
transferring agents to the engine's surfaces and hold them there.
By positioning vital agents where they are most needed, Series 2000
provides a degree of engine protection unavailable with any other
oil.
AMSOIL Series 2000 20W-50 Synthetic Racing
Oil clings tenaciously to engine surfaces, so it shields engines from
start-up wear. Further enhancing wear protection, AMSOIL Series 2000
20W-50 Synthetic Racing Oil's wax-free lubricating basestocks assure
rapid post-start-up lubrication.
AMSOIL Series 2000 20W-50 Synthetic Racing
Oil contains powerful corrosion preventives, detergents, dispersants
and anti-foam agents to protect engines from the harmful effects of
water, acids, debris, deposit-forming materials and air entrained
oil.
Boosts Power, Speed
and Efficiency
AMSOIL Series 2000 20W-50
Synthetic Racing Oil reduces friction so effectively that virtually
none of the engine's
power is wasted on "drag." Its extraordinary formulation
gives Series 2000 a coefficient of friction lower than that of other
fine, race-formulated synthetic oils. With Series 2000, vehicles
accelerate
fast, attain top speeds and use fuel efficiently.
Maintains Integrity
in Demanding Conditions
AMSOIL Series 2000 20W-50 Synthetic Racing
Oil maintains a constant high level of performance over time because
it resists the damage many oils undergo in high temperature, intense
shearing force conditions.
Advanced thermal stability allows AMSOIL
Series 2000 20W-50 Synthetic Racing Oil to circulate readily, thus
protecting hard-to-reach areas that heat-damaged oils grow too thick
to reach.
Superior shear stability allows AMSOIL
Series 2000 20W-50 Synthetic Racing Oil to provide a dependable pad
of protection between parts even after exposure to shearing forces
that tear lesser oils apart.
APPLICATION
AMSOIL Series 2000 20W-50
Synthetic Racing Oil is recommended for applications requiring
the following specifications:
-
API SL, SH, SJ, CF
-
ACEA A2, A3, B2, B3
-
FORD ESR-M2C 179A
-
VW 501.01, 505.00
-
CHRYSLER MS-8809A
-
JASO VTW
-
JASO MOTORCYCLE MB
MIXING AMSOIL
AMSOIL Series 2000 20W-50 Synthetic Racing
Oil may be mixed with petroleum-based oils or with other synthetic
oils. However, a mixture of AMSOIL Series 2000 20W-50 Synthetic Racing
Oil and another oil may offer a shorter service life than pure AMSOIL
Series 2000 20W-50 Synthetic Racing Oil does. The AMSOIL Product Warranty
does not apply to mixtures of AMSOIL Series 2000 20W-50 Synthetic
Racing Oil and other oils.
SERVICE LIFE
Non-turbo-charged, non-race gasoline
engines: Change the oil at intervals up to three times longer
than recommended by the manufacturer, or one year, whichever comes
first.
Turbo-charged, non-race gasoline engines:
drain oil at intervals up to three times longer than those recommended
by the engine manufacturer, or six months, whichever comes first.
Race engines: Specified by Owner
Experience/Oil Analysis.
Marine four-cycle gasoline engines
and infrequently used automotive four-cycle gasoline engines:
drain oil at intervals up to three times longer than those recommended
by the engine manufacturer, or one year, whichever comes first.
Gasoline four-cycle fleet vehicle
engines: drain oil at intervals up to two times as long, or six
months, as engine manufacturer's recommendations if the findings of
a conscientiously applied program of used oil analysis indicate the
oil remains serviceable.
AMSOIL Full-Flow Oil Filters should be
changed at 12,500-mile or six-month intervals, whichever comes first,
in gasoline engines. If a Hastings or other filter is used, filter
should be changed at manufacturer recommendations.
|
TYPICAL
PHYSICAL PROPERTIES
|
|
AMSOIL Series 2000
Synthetic 20W-50 Racing Oil (TRO)
|
|
Kinematic Viscosity @ 100°C,
cSt (ASTM D-445)
|
18.3
|
|
Kinematic Viscosity @ 40°C,
cSt (ASTM D-445)
|
128.1
|
|
Viscosity Index (ASTM D-2270)
|
160
|
|
Cold Crank Simulator Apparent
Viscosity @ -10°C, cP (ASTM D 2602)
|
2343
|
|
High Temperature/High Shear
@ 150°C and 1.0 X 106 s-1 , cP (ASTM
D 4683)
|
5.1
|
|
Pour Point °C (°F) (ASTM D
92)
|
-36 (-33)
|
|
Flash Point °C (°F) (ASTM D
92)
|
234 (453)
|
|
Fire Point °C (°F) (ASTM
D 92)
|
254 (489)
|
Noack
Volatility (DIN 51581) 250°C for 1 hour, % weight loss |
5.9
|
|
Four-Ball Wear Test (ASTM
D 4172: 60kg, 150°C, 1800 rpm, 1 hr) Scar diameter, mm
|
0.440
|
|
Four-Ball Wear Test (ASTM D
4172: 40kg, 150°C, 1800 rpm, 1 hr) Scar diameter, mm
|
0.35
|
|
Total Base Number
|
>11.0
|
|
|
|
|
|
|
|
|
